MEDTRONIC TRADERS
The Bluewave provides accurate, reliable, and repeatable particle size analysis for a diverse range of applications by utilizing the proven theory of Mie compensation for spherical particles and the proprietary principle of Modified Mie calculations for non-spherical particles.
The Bluewave is optimized for materials below 1 micron delivering unsurpassed resolution. The Bluewave measures particle size from 0.01 to 2800 microns. ★Biotechnology/PharmaceuticalsThe Microtrac S3500 is the first particle size analyzer that uses three precisely placed red laser diodes to accurately characterize particles like never before. The patented Tri-Laser System provides accurate, reliable and repeatable particle size analysis for a diverse range of applications by utilizing the proven theory of Mie compensation for spherical particles and the proprietary principle of Modified Mie calculations for non-spherical particles. The S3500 measures particle size from 0.02 to 2800 microns.
★Biotechnology/PharmaceuticalsThe TRI-BLUE is the latest laser diffraction particle size distribution analyzer from Microtrac’s acclaimed product line. The TRI-BLUE is the first analyzer to use three fixed, blue laser diodes to measure wet suspensions from 10 nanometers to 700 microns. What sets the TRI-BLUE apart is it’s ability to precisely and accurately measure particles under 1 micron, by taking full advantage of the superior resolution enabled by the shorter wavelength of the blue lasers.
★Biotechnology/Pharmaceuticals
The Sample Delivery Controller (SDC) works in conjunction with the Microtrac S3500 and Bluewave Laser Diffraction systems. The SDC is fully automated and is designed to deliver a well-dispersed sample quickly and accurately.
★Dispersion vessel constructed of surgical-grade stainless steelTurbotrac’s primary function is to deliver a properly dispersed sample to the measuring cell in the Microtrac optical bench allowing for consistent and repeatable particle size analysis of dry powders.
★Flexibility of compressed air and flow conditions settingsThe Microtrac Ultra Small Volume Recirculator (USVR) works in conjunction with the Microtrac S3500, TRI-BLUE, or Microtrac Bluewave Laser Diffraction systems.
★35 to 50mls recirculation volume
Featuring an enhancement to traditional DLS, the Nanotrac Wave II employs Reference Beating, which amplifies the signal back to the photodector, producing unparalleled accuracy for measuring particle size, zeta potential, molecular weight, and concentration of colloidal systems.
The Nanotrac Wave II provides user with superior particle analysis capability by taking advantage of an enhanced optical signal, innovative probe technology, and advanced algorithms. Whether your material is ppm or near finished product, the Wave II obtains fast, sensitive, and precise measurements of materials ranging from sub-nanometer to several microns.
★Pharmaceuticals/BiotechnologyProviding unparalleled characterization results, the Nanotrac Wave II takes full advantage of the amplified optical signal, probe technology fixed at the cuvette interface, and advanced algorithms. From ppm to near finished product, the Nanotrac Wave II Q determines fast, repeatable, and sensitive measurements of particles ranging from sub-nanometer to several microns.
★Pharmaceuticals/BiotechnologyPowered by Microtrac’s enhanced Dynamic Light Scattering technology, the Nanotrac Flex is ideal for measuring particles across wide concentration ranges using minimal sample volume. Named appropriately, the external probe provides users with the flexibility to measure sub nanometer to several micron particle suspensions in-situ or on a lab bench.
What sets the Nanotrac Flex apart from other DLS systems is the unique probe technology, which turns any vessel into a sample cell. The probe also utilizes an enhanced optical signal, which yields fast, accurate, and sensitive particle size measurements of materials ranging from ppm to near finished product.
★Pharmaceuticals/Biotechnology
The Zetrator works in conjunction with the Microtrac DLS system. The Zetrator is available in 1, 3, or 5 titrant stations.
★Uses pH as the controlling variable
By utilizing compressed air, the PartAn Mini can evenly disperse fine, cohesive powders for accurate particle size and shape measurements. The PartAn Mini measures from 4 to 4500 microns. Our PartAn Mini is well known for its ability to produce and reproduce accurate, quick and reliable results that easily can be calibrated to your quality control procedures.
★Characterizes 31 morphological parametersThe PartAn3D can measure 32 morphological parameters of your material including size, shape, surface roughness, density, transparency, and of course 3D in one fast analysis. The PartAn3D can measure particles ranging in size from 15 microns to 35 millimeters.
★MiningThe PartAn3D Maxi is a large particle size and shape analyzer that can measure particles ranging in size from 0.28 to 127 millimeters.
★Mining
The DustMon is available in two versions. The DustMon L characterizes high level dust in powder and granulates and the DustMon LS characterizes both high- and low concentration dust applications. The DustMon measures the particle size distribution in the dust concentration.
★Building materialsBased on our experience in imaging technology since 1986, we’ve developed the SI to characterize particle size and shape in various suspensions and emulsions. The SI works in conjunction with the S3500 or Bluewave Laser Diffraction systems as well as, the SDC and USVR.
The SI particle analyzer is a compact measuring instrument that measures particle size distribution and the particle shape at the same time. The SI delivers superior quality results, higher production profitability and a fast return on investment.
Software + Evaluation
All particles in the measuring field are measured. The measured distribution data is stored and can be displayed or printed (graph or table) during the measurement.
Our PartAn systems are reliable, rugged systems for the measurement of granules such as fertilizer, sand, sugar, stone and a wide variety of food industry products. We have designed our measuring method to be both intuitive and functional. The PartAn 3D PRO is acclaimed for its user-friendliness and application flexibility.
★Mining
The PartAn3D Maxi PRO is a large particle size and shape analyzer that can measure particles ranging in size from 0.28 to 127 millimeters. Microtrac uses patented on-line 3D analysis technology with the PartAn3D PRO and PartAn3D Maxi PRO. We have over over 25 years experience helping quality control departments improve their product quality with Online Dynamic Image Analysis.
★MiningThe PartAn SI PRO can measure wet materials ranging in size from 5 to 1500 microns. With Microtrac’s experience in imaging technology, we’ve developed the PartAn SI PRO to characterize the particle size and shape in various suspensions and emulsions.
The PartAn SI PRO is an automated lab analyzer that characterizes the particle size and particle shape using a 5 megapixel camera.
This liquid particle analyzer is a compact on-line measuring system. All components are accommodated in one housing assembly. The PartAn SI PRO is able to measure particle size distribution and the particle shape at the same time.
★Mining
★The minimum PC requirements for Merit PC software are:-
★Personal Computer with Pentium class processor
★Pentium 200 MHz or better
★Microsoft Windows 95, 98, Me, 2000, NT, XP, 7, 8, 10.
★Free hard-drive space required: 2 MB
★CD-ROM drive
★XGA or higher resolution monitor
★Monitor resolution 1024 x 768 or better
★Microsoft Mouse or compatible pointing device
★Two available USB ports
The systems are easy to use by control panel operation, or by use of the sophisticated 21 CFR part 11 compliance Cecil PowerStream software, for instrument control, data acquisition, processing and reporting.
The modularity of each system enables its configuration to be modified with ease, for instance for use with electrochemical or UV/Visible detectors. Modules may readily be replaced, to reduce down-time, should the need arise.
Consequently, reliable, modular, versatile, effortless and sensitive IonQuest Ion Chromatography, with autosampler automation options, has numerous laboratory applications. Just a few instances include;
★Detection of arsenic forms, in seafood and in rice.
With an optical bandwidth of 4nm and superb stability, accuracy and precision these very easy to use instruments are ideal general purpose spectrophotometers. Excellent for routine and quality control laboratories, they offer a wide range of quantitative techniques with wavelength scanning as an option. Both UV Visible and Visible versions are available with full validation procedures.
The ease of operation makes even complex tasks simple. An exceptional range of software and accessories makes the Aurius and Super Aurius instruments superb multi-user instruments, ideal for multi-discipline laboratories.
All scans, curves and data produced by the spectrophotometers may be scrolled across the screen providing a very wide 6 screen widths - 550mm - of viewing of extended displays.
The low straylight of the instruments, less than 0.01%, allows a measurement of 3 Absorbance units to be made with an error close to 1%.
This performance should be compared with errors of 26%, 10% and 6% which result from straylight of 0.5%, 0.1% and 0.05% respectively for the same measurement.
The Super Aurius instruments are unique for their very high performance scanning, with derivatives, overlay, extended analytical power and multi-cell Kinetics. They cover the full 190-1100nm wavelength range with a narrow 1.8nm optical bandwidth. With straylight of 0.01%, wavelength precision of 0.1nm and baseline stability of better than ±0.001A/hr, the most demanding analytical work may be undertaken.
The ease of operation makes even complex tasks simple. An exceptional range of software and accessories makes the Aurius and Super Aurius instruments superb multi-user instruments, ideal for multi-discipline laboratories.
All scans, curves and data produced by the spectrophotometers may be scrolled across the screen providing a very wide 6 screen widths - 550mm - of viewing of extended displays.
The low straylight of the instruments, less than 0.01%, allows a measurement of 3 Absorbance units to be made with an error close to 1%.
This performance should be compared with errors of 26%, 10% and 6% which result from straylight of 0.5%, 0.1% and 0.05% respectively for the same measurement.
Rapid operation with ease of use is provided by the powerful software built into the computing system of the Aquarius instruments. The standard software is remarkably comprehensive but may be expanded, at any time, by E-SEF to release additional software modules when required.
The fully symmetrical double beam system of the Aquarius instruments provides for the highest accuracy of measurement coupled with a very high level of stability with time.
Both sample and reference beams are provided with the same sampling space and facilities, thus catering for the widest possible range of experimental requirements and not limited to just a single cell in the reference beam.
By scrolling information across the display screen, the effective width of the screen is increased to a massive 550mm.
Long scans, plots and other data may be viewed in much more detail, than with other instruments as viewing is not limited to one screen width of information.
The Super Aquarius instruments offer all the features of the Cecil Aquarius double beam instrument with additional optical sophistication,enhanced performance and added power.
Super Aquarius is the choice for versatility, ultimate performance and the measurement of diverse and difficult samples.
The top of the range CE 9500, offers four optical resolutions, 0.5, 1, 2 and 4nm. For samples with narrow absorption bands such as vapours and gases, the narrow 0.5nm bandwidth is extremely valuable. When high energy is helpful, for instance in measuring difficult turbid samples or fluorescence measurements, the 4nm bandwidth provides increased sensitivity and accuracy of measurement.
The rapid operating system of the Super Aquarius UV/Visible spectrophotometers includes a mass of powerful software including complete instrument programming, band area correction and computation, spectral differencing and stripping etc. The software may be expanded by E-SEF - Encoded Software Enhancement Facility. Codes are available by telephone, fax or E-mail with no delay. A large built in memory stores 100 scans, plots, curves and methods all password protected.
A high performance end on photomultiplier is used in a fully symmetrical optical system to provide the best possible measuring accuracy, with low noise, even when making difficult low energy measurements. Baseline stability is at least 10 times better than for single beam instruments.
The AA500 Atomic Absorption Spectrometer is available in THREE configurations.
★ Flame Analysis Only (AA500F)The AA500 is fully controlled by the embedded computer system and AA-Win Pro GLP Software. Three flame options are available to the user with the Air/Acetylene being the standard configuration. This flame can be used for nearly all standard elements while the N2O/Acetylene and the Air/LPG (Natural gas) are available as an option for the more demanding of elements. All three flame configurations offer coded burner for full safety protection.
The AS500 Universal Auto-sampler is specifically designed for the AA500 Atomic Absorption Spectrometer. The AS500 can be used to automatically introduce standard and unknown samples to the atomiser for analysis. It can be used with both flame and graphite furnace instruments.
★38 sample positions (6 for standard samples, 32 for unknown samples.The PG990 Atomic Absorption Spectrophotometer is a versatile low cost, entry level instrument with a computer controlled Air/Acetylene flame for general laboratory requirements. Due to its high sensitivity and excellent performance the instrument can be used for a wide range of applications including
★Agricultural
AAWin Pro software allows the Analyst to control all aspects of their analytical method whilst providing an extensive range of tools for data collection, storage and interpretation.
★The GLP software interface consists of three key work-areas, whilst having toolbars to access many others. These work areas allow the user to view real-time signal acquisition, up-to-date display of calibration curves and a flexible, sample table.Fully automated fast Continuous Flow Hydride System Analysis Hydride Atomic Absorption Generation System comprising of a FOUR Channel Micro Pump with a Unique gas-liquid separator system. The instrument is supplied with AAHYD-Win Software for full control of the system and the interface to the AA500 Universal Auto-sampler for complete automation. The automation of the hydride system can be carried out easily and quickly and at NO extra cost.
A holder for Holder for HCl, NaBH4 and Internal Standard bottles (500mL) and 2 Rinse Vials (50mL) are included.
★Improved detection limits for inorganic Hg
For use with AA500G / AA500FG
★Re-circulating water cooler
PG Instruments fully adjustable Micron-Mist Nebuliser for easy analysis of a wide variety of sample matrices
The Micron-Mist Fully Adjustable nebuliser is designed by PG Instruments Limited for their AA500 Flame Atomic Absorption Spectrometer. The nebulizer can also be retro-fitted to most other makes of Atomic Absorption Spectrometers. The nebuliser produces an ultra-fine mist thanks to the unique design of the nebuliser that acts like a Resonating Micro-Membrane.
The nebuliser is Fully Inert with an Adjustable uptake rate of between 2 and 6ml/min. This Nebuliser offers Excellent RSD’s typically <1.0% Enhanced sensitivity. The Fully Adjustable Nebuliser can be used on our AA500 flame and the AA500 combined flame and furnace systems as well as the AA990 flame system. A version is available with Pt/Ir capillary for analysis of HF solutions.
PG Instruments Exhaust Venting System is manufactured in the UK from High Quality BRITISH Stainless Steel and Comprises of:
★ONE Extraction fan with polymer coated anti-corrosion protection blades 150mm Diameter, 240 volts (120volt on request) 50/60Hz.The 750 Series is a configurable system designed to meet the requirements of any laboratory accommodating water supply from a potable source. The comprehensive nature of the 750 series ensures suitability to different Industry sectors.
Both RO (reverse osmosis) and UP (uitra pure) grades of water can be produced to varying degrees of Purity dependant on theintended use of the water.
★General Laboratory Analysis
The GC650 is available with ALL conventional detectors namely
★FID (Flame Ionisation Detector)